AOQUN Teaches You How To Clean And Maintain The Ventilator Mask
Views : 573
Update time : 2021-06-30 11:56:05
The ventilator mask needs scientific cleaning and maintenance, and the effect of the mask is more superior. The mask is very close to the human body and needs to be kept clean. The maintenance of the mask depends on wearing three points and seven points. Let's take a look at how to clean and maintain the mask.
Preparations to be done before cleaning the mask:
1. Make sure the parts are in good condition before cleaning
2. Disassemble all parts of the mask as much as possible
3. Open the oxygen port cover
Cleaning "assistant": If it is cleaned frequently, the mask is relatively clean. You can soak the entire mask for 5 minutes and add a neutral detergent to dissolve it in water. If the mask is more dirty, use the breathing mask cleaning brush to gently scrub the dirt accumulation.
Cleaning tips:
1. Mask headband: The mask headband can use neutral detergent or purified water, gently rub the dirty place, and control the strength to avoid deformation. It is recommended to clean it once a week.
2. Mouth and nose pads and nasal pads: It is recommended to rinse with clean water every day. If there is a lot of residual oil, you can dilute it with a neutral cleanser and use a breathing mask to clean and scrub. After cleaning, place it in a ventilated and cool place to drain the water. Be careful not to store the mask and pipes in direct sunlight, otherwise it will accelerate the aging of the mask material.
AOQUN CPAP Cleaning Brush
Points to note when cleaning the ventilator mask:
1. The mask of the ventilator is made of special materials and should be cleaned with water at room temperature, never with hot water.
2. Cleaning agents containing alcohol, antibacterial agents, bleaching agents, fragrances, moisturizers, vinegar, sesame oil and other ingredients should not be used to clean the pipes and masks. Such cleaning agents have a great chance of reducing the service life of the ventilator mask.
3. After cleaning, avoid direct sunlight and high-temperature scorching. It should be stored in a cool and ventilated place to air-dry to avoid scratches on the mask.
4. In addition to daily care masks, be careful not to store them together with cotton fabrics and filament, lest the Velcro is stuck with filament fibers and the adhesive function of the headband is weakened.
Maintenance of the mask:
To maximize the effectiveness of the treatment experience, the mask is used as a consumable. In addition to the usual regular care, the mask needs to be replaced on a regular basis. The general replacement cycle is recommended to be 6 months. The mask is a consumable. If any part is found to be damaged, it should be replaced immediately so as not to reduce its efficiency.
Correct daily maintenance will help increase the service life of the ventilator and enhance the user's use effect. For this reason, Aoqun Brush Company has developed a breathing mask cleaning brush suitable for all ventilators. The breathing mask cleaning brushes are all made of healthy and environmentally friendly materials: spring rods made of high-quality stainless steel, solid and fine workmanship, can bend freely without deformation. Even the U-shaped hard tube can be cleaned deeply, which is very convenient. Easy to clean, easy to maintain, easy to operate, and durable.
