Is the CPAP Tube Cleaning Brush Stuck In The CPAP Pipeline? Don'T Worry, AOQUN Will Help You
Views : 641
Update time : 2021-03-22 17:41:43
Alex from Germany wanted to add a new product, but he did a survey. Consumers reported that the CPAP tube cleaning brush was stuck in the CPAP pipeline. Consumers were very distressed and didn’t know how to take it out. Not being able to take it out meant buying a new CPAP. pipeline. So this problem needs to be solved effectively.
The senior product manager of Aoqun first learned how the CPAP tube cleaning brush is stuck in the CPAP pipeline and where it is usually stuck. Alex feedback that when the brush head enters 1/2 length of the pipe, it feels difficult to enter the CPAP pipe again, and the spring wire cannot be pulled out even if it is straightened.
The senior product manager of Aoqun recommends putting the CPAP pipe and CPAP tube cleaning brush in the water before use, and then you can first pass the non-brushed end through the pipe, and then pull it out. If you find it in the process of pulling If there is resistance, do not continue to pull it vigorously-you should keep the CPAP pipe straight. If you can’t keep it straight, keep rotating the CPAP pipe with one hand and pull the spring with the other. The CPAP tube cleaning brush will work very smoothly and solve the problem easily.
Alex very much agrees with the senior product manager of Aoqun, and printed the correct processing method of the CPAP tube cleaning brush card in the CPAP pipeline on the box, which has been widely recognized by customers. The purchase volume has increased from 10,000 sets to 30,000 sets.
