We use cookies to improve your online experience. By continuing browsing this website, we assume you agree our use of cookies.
Brush News

How To Clean A Moldy Water Bottle?

Views : 676
Update time : 2021-11-16 11:11:16
I believe everyone will buy reusable kettles to store water in the suburbs because this will protect the environment and save resources. However, cleaning the kettles becomes very important. Many people do not thoroughly clean the kettle, which causes the bacteria in the air to grow in the mouth of the kettle. The stubborn mold must be carefully removed so that you can use it again. The tools we need to prepare our bottle cleaning brushes, rags, and detergents.
 
bottle cleaning brushes
 
First of all, we need to separate the kettle, including the lid, the straw that is combined with the lid, and the rubber ring. Over time, a lot of dirt and mold accumulate in the rubber ring, and the rubber ring of the drinking bottle is particularly easy to absorb. Mold. After removing all the parts, it is ready to start cleaning.
 
The second step is to clean the bottle. Put warm water into the water bottle, two-thirds of the bottle body, drip 2-3 drops of detergent, close the lid, shake the bottle for 1-2 minutes, then pour out the water. For stubborn fungi, you need to use a bottle cleaning brush, combined with detergent, and scrub it several times until all the stains are removed.
 
The third step is to clean the bottle cap and seal the rubber ring, as well as the straw. Prepare dish soap and hot water for cleaning, and wipe every corner of the rubber ring and bottle cap with a rag. The straw should be cleaned with a straw cleaning brush, with detergent inserted into the straw, pulled back and forth, and then rinse the inside of the straw with hot water.
 
The fourth step is to use a clean rag to stain the water or place it on the drain rack. When the water is dry and completely dry, it can be used again.

 
Aoqun Cleaning Brush Manufacturer
Related News
Read More >>